The Martin Audio WMX is a compact, high performance flown or ground stacked subwoofer featuring our trademark Hybrid™ loading. Primarily intended for use with the W8LM/W8LMD, it shares the same cabinet width and is directly compatible with the W8LM and its flying hardware.
A single long-excursion 18" (460mm)/ 4" (100mm) coil driver is front loaded by a hyperbolic horn with an ultra-low flare rate. The rear of the driver is reflex loaded to extend the LF output to below the natural cut-off point of the horn. This Hybrid™ technique marries the very high efficiency of horn loading with the extended low frequency response of a reflex enclosure.
features
Very
high output compact Hybrid™ folded horn/reflex loaded
subwoofer.
Single
18" (460mm) ultra-long excursion high power drive unit
Frequency
response 35Hz-150Hz ± 3dB (-10dB @ 28Hz)
104dB
1W/1m
Fast
integral rigging system
Compatable
with W8LM and W8LMD line array elements
Can
be ground stacked or flown
Socket
for pole mounted W8LMD
applications
Dedicated
flown or groundstacked sub for use with W8LM and W8LMD
Ground
stacked sub with any Martin Audio Wavefront products
Fixed
installations
Live
sound reinforcement
Corporate
events
Theatre
sound reinforcement
overall
dimensions
TECHNICAL SPECIFICATIONS
| TYPE | Hybrid™ horn and reflex loaded subwoofer |
| FREQUENCY RESPONSE (1) |
35Hz-150Hz ± 3dB -10dB @ 28Hz |
| DRIVERS | 18"
(460mm)/ 4" (100mm) voice coil, ultra-long excursion, water resistant cone |
| RATED POWER (2) | 1000W AES, 4000W peak |
| SENSITIVITY (6,3) | 98dB (open space) 104dB (half space) |
| MAXIMUM SPL (CALCULATED @ Im) |
127dB continuous, 133dB peak (open space) 133dB continuous, 139dB peak (half space) |
| NOMINAL IMPEDANCE | 8 ohms |
| CROSSOVER | 70Hz-150Hz
active low pass (via DX1 controller) |
| ENCLOSURE | Rectangular, multi-laminate birch ply |
| FINISH | Textured paint |
| PROTECTIVE GRILLE | Perforated steel |
| CONNECTORS | 2 x Neutrik NL8 |
| FITTINGS | Proprietary rigging system Interlocking skids on top & bottom 2 generously sized bar handles on each side Mounting clips for optional lid Top mounted top hat fitting |
| DIMENSIONS (inc. wheels) |
(W) 620mm x (H) 620mm x (D) 905mm (1032mm) (W) 24.4ins x (H) 24.4ins x (D) 35.6ins (40.4ins) |
| WEIGHT | 87kg (191lbs) |
 |
