Application:

WMX

Hybrid® horn and reflex loaded subwoofer

The Martin Audio WMX is a compact, high performance flown or ground stacked subwoofer featuring our trademark Hybrid® loading. Primarily intended for use with the W8LM/W8LMD, it shares the same cabinet width and is directly compatible with the W8LM and its flying hardware.

A single long-excursion 18" (460mm)/ 4" (100mm) coil driver is front loaded by a hyperbolic horn with an ultra-low flare rate. The rear of the driver is reflex loaded to extend the LF output to below the natural cut-off point of the horn. This Hybrid® technique marries the very high efficiency of horn loading with the extended low frequency response of a reflex enclosure.

Accessories
Accessories

Features


  • Very high output compact Hybrid® folded horn/reflex loaded subwoofer.
  • Single 18" (460mm) ultra-long excursion high power drive unit
  • Frequency response 35Hz-150Hz ± 3dB (-10dB @ 28Hz)
  • 104dB 1W/1m
  • Fast integral rigging system
  • Compatable with W8LM and W8LMD line array elements
  • Can be ground stacked or flown
  • Socket for pole mounted W8LMD

Applications


  • Dedicated flown or groundstacked sub for use with W8LM and W8LMD
  • Ground stacked sub with any Martin Audio Wavefront products
  • Fixed installations
  • Live sound reinforcement
  • Corporate events
  • Theatre sound reinforcement
+
Technical Specification – View
TYPE Hybrid® horn and reflex loaded sub-woofer
FREQUENCY RESPONSE (1) 35Hz-150Hz ± 3dB, -10dB @ 28Hz
DRIVERS 18" (460mm)/ 4" (100mm) voice coil, ultra-long excursion, water resistant cone
RATED POWER (2) 1000W AES, 4000W peak
RECOMMENDED AMPLIFIER MA12K
SENSITIVITY (6,3) 98dB (open space), 104dB (half space)
MAXIMUM SPL
(calculated @ 1m)
128dB continuous, 134dB peak (open space)
134dB continuous, 140dB peak (half space)
NOMINAL IMPEDANCE 8 ohms
CROSSOVER 70Hz-150Hz active low pass via DX1.5 or DX2 controller
ENCLOSURE Rectangular, multi-laminate birch ply
FINISH Black textured paint
PROTECTIVE GRILLE Black perforated steel
CONNECTORS 2 x Neutrik NL8
FITTINGS Proprietary rigging system
Interlocking skids on top & bottom
4 x bar handles
Mounting clips for optional lid
Top mounted top hat fitting
DIMENSIONS (inc. wheels) (W) 620mm x (H) 620mm x (D) 905mm (1032mm)
(W) 24.4ins x (H) 24.4ins x (D) 35.6ins (40.6ins)
WEIGHT 87kg (191lbs)
+
Technical Drawing – View

Touring and Theatre

Further Information

MLA PORTAL
MLA Mini Video
MLA Brand Video
MLA PORTAL

Recommended Amp

MA12K

Find Your Distributor
Latest Tweet
All material © 2013. Copyright Martin Audio Ltd. Subject to change without notice. Martin Audio Ltd. Reg. No. 4824341
Martin Audio and the Martin Audio Logo are trademarks of Martin Audio Ltd and are registered in the United Kingdom, United States and other countries.