C8.1T

Ceiling mounted, two-way vented enclosure

The C8.1T has been specifically designed for higher ceilings where its high SPL capability and controlled 90° dispersion enable it to provide excellent intelligibility in more reverberant rooms. It features an 8" (200mm) unit with a carbon fibre loaded, polypropylene cone and a 1" (25mm) horn-loaded dome tweeter mounted side-by-side for optimum dispersion and smooth response off-axis. The enclosure is ported to extend the low frequency performance and the 5-point mounting system ensures that installation is fast and secure. Input and link terminals make paralleling units a simple operation and a steel cover plate protects the input connector against fire.

These products comply with UL2043 Fire Tests for Heat & Visible Smoke Release for Discrete Products and their Accessories Installed in Air Handling Spaces.
Listed UL1480 General Signalling Speakers.

SUITABLE FOR USE IN AIR HANDLING SPACES

Accessories
Accessories

Features


  • Two-way high performance flush mounting ceiling speaker
  • 8" (200mm) UL94V-0 carbon fibre loaded polypropylene
    cone bass
  • Wide dispersion – 90° conical up to 7kHz
  • High & low impedance operation – transformer included
  • 110dB max SPL @ 1 metre (16 ohm)
  • 125 watt power handling (60W through transformer)
  • Polyswitch and thermal fuse protected
  • Steel backcan
  • UL2043 & UL1480

Applications


  • Fixed installs in ceilings & walls
  • Bars and restaurants

 

+
Technical Specification – View
TYPE Ceiling mounted, two-way vented enclosure
FREQUENCY RESPONSE (1) 80Hz-18kHz ± 3dB
-10dB @ 50Hz
DRIVERS 8" (200mm) UL94V-0 PP bass driver
1" (25mm) dome tweeter
RATED POWER (2) 125W AES, 500W peak
RECOMMENDED AMPLIFIER MA2.8Q
SENSITIVITY (3) 91dB
MAXIMUM SPL (4) 110dB continuous, 116dB peak
NOMINAL IMPEDANCE 16 ohms
DISPERSION (-6dB) 90° conical up to 7kHz
CROSSOVER 3kHz passive
ENCLOSURE Steel backcan
FINISH Bezel & grille – white UV resistant
Overpaintable
Backcan – zinc plated
PROTECTIVE GRILLE Perforated steel
CONNECTORS Rising clamp plug and socket
ACCESSORIES (included) 60W 70/100V line transformer
Tile rails
C bracket
Paint mask
Cut-out template
VOLTAGE TAPS

100V – 60W, 30W, 15W
70V – 60W, 30W, 15W, 7.5W

DIMENSIONS (OD) 354mm x (D) 258mm
(OD) 13.9ins x (D) 10.2ins
CUT-OUT DIAMETER 308mm (12.14 ins)
WEIGHT 6.7kg (14.8lbs)
+
Technical Drawing – View

Commercial Installation

Further Information

MLA PORTAL
MLA Mini Video
MLA Brand Video
MLA PORTAL

Recommended Amp

MA 2.8Q

Find Your Distributor
Latest Tweet
All material © 2014. Copyright Martin Audio Ltd. Subject to change without notice. Martin Audio Ltd. Reg. No. 4824341
Martin Audio and the Martin Audio Logo are trademarks of Martin Audio Ltd and are registered in the United Kingdom, United States and other countries.