C6.8T

Ceiling mounted, two-way vented enclosure

Featuring a 6.5" (165mm) bass driver and a 0.8" (19mm) dome tweeter, The C6.8T is ideal for flush mounted applications where full frequency performance and wide dispersion are required from a compact, ported enclosure. The side-by-side arrangement of the drive units maintains smooth response up to 75° off-axis and makes the C6.8T perfectly suited for use in low ceilings, where its broad coverage means that fewer units will be required to deliver premium sound over the required listening area. The C6.8T features a 4-point mounting system for ease of installation and a rising clamp plug and socket permit easy pre-wiring with up to 2.5mm2 conductors.

These products comply with UL2043 Fire Tests for Heat & Visible Smoke Release for Discrete Products and their Accessories Installed in Air Handling Spaces.

Listed UL1480 General Signalling Speakers.

SUITABLE FOR USE IN AIR HANDLING SPACES

Accessories
Accessories

Features


  • Two-way high performance flush mounting ceiling speaker
  • 6.5" (165mm) UL94V-0 carbon fibre loaded polypropylene cone bass driver
  • Very wide dispersion – 150° conical up to 7kHz
  • High & low impedance operation – transformer included
  • 106dB continuous max SPL @ 1 metre
  • 75W power handling – 16 ohm (40W transformer)
  • Polyswitch and thermal fuse protection
  • Steel backcan
  • UL2043 & UL1480

Applications


  • Fixed installations in ceiling and walls
  • Low ceiling environments

 

+
Technical Specification – View
TYPE Ceiling mounted, two-way vented enclosure
FREQUENCY RESPONSE (1) 90Hz-20kHz ± 3dB
-10dB @ 70Hz
DRIVERS 6.5" (165mm) UL94V-0 PP bass driver
0.8" (19mm) dome tweeter
RATED POWER (2) 75W AES, 300W peak
RECOMMENDED AMPLIFIER MA2.8Q
SENSITIVITY (3) 89dB
MAXIMUM SPL (4) 106dB continuous, 112dB peak
NOMINAL IMPEDANCE 16 ohms
DISPERSION (-6dB) 150° conical up to 7kHz
CROSSOVER 4kHz passive
ENCLOSURE Steel backcan
FINISH Bezel & grille – white UV resistant
Overpaintable
Backcan – zinc plated
PROTECTIVE GRILLE Perforated steel
CONNECTORS Rising clamp plug and socket
ACCESSORIES (included) 40W 70/100V line transformer
Tile rails
C bracket
Paint mask
Cut-out template
VOLTAGE TAPS

100V – 40W, 20W, 10W
70V – 40W, 20W, 10W,  5W

DIMENSIONS (OD) 260mm x (D) 181mm
(OD) 10.2ins x (D) 7.1ins
CUT-OUT DIAMETER 224mm (8.83 ins)
WEIGHT 3.5kg (7.7lbs)
+
Technical Drawing – View

Commercial Installation

Further Information

MLA PORTAL
MLA Mini Video
MLA Brand Video
MLA PORTAL

Recommended Amp

MA 2.8Q

Find Your Distributor
Latest Tweet
All material © 2013. Copyright Martin Audio Ltd. Subject to change without notice. Martin Audio Ltd. Reg. No. 4824341
Martin Audio and the Martin Audio Logo are trademarks of Martin Audio Ltd and are registered in the United Kingdom, United States and other countries.